Buy DID numbers for Yealink Cloud — SIP trunk setup with DIDHub
DIDHub provides DIDs and SIP trunks for Yealink phones, Yealink Cloud / YMCS deployments, and Yealink-managed UC environments. Yealink phones register cleanly to DIDHub via SIP, with TLS + SRTP for secure registration and call media. Provisioning via Yealink RPS or local config.
Why DIDHub for Yealink Cloud
- Native Yealink SIP profile. Yealink T-series, T4-series, T5-series desk phones, and W-series cordless all register to DIDHub using standard SIP. No Yealink-specific config trick required.
- TLS + SRTP support. Yealink supports SIP-over-TLS and SRTP. DIDHub's edge supports both. Encrypted-by-default deployments are straightforward.
- Per-DID flat pricing. Each Yealink user gets their own DID at $1.99 (US) flat — no per-seat carrier surcharge.
- Yealink RPS auto-provisioning compatibility. Yealink's Redirection & Provisioning Service (RPS) provisions phones with config URLs; the SIP credentials inside that config can point at DIDHub seamlessly.
- Works with Yealink-Microsoft Teams certified models. Yealink Teams-certified models can register to Microsoft Teams via DIDHub's Teams Direct Routing path. Same DIDHub trunk serves both Yealink-direct and Yealink-on-Teams users.
SIP trunk setup — step by step
- Sign up at /signup and provision DIDs.
- Generate DIDHub SIP credentials per Yealink phone (or per-user / per-extension if using a PBX in front).
- Configure each Yealink phone's Account 1: SIP server
sip.didhub.io, transport TLS (port 5061), SRTP enabled, credentials from DIDHub. - If using Yealink RPS, embed DIDHub credentials in the per-MAC config templates pushed via RPS.
- Test registration; place inbound + outbound calls; verify SRTP encryption with packet capture if needed.
- For shared-line / call-park / BLF features, use a PBX (FreePBX, 3CX, FusionPBX, Grandstream UCM) in front of DIDHub instead of registering Yealink directly to DIDHub.
Pricing snapshot
Per-DID + per-minute pricing. Each Yealink user gets a real DID at flat rate — no per-seat carrier add-on.
| Country | Number type | From |
|---|---|---|
| United States | Geographic local | $1.99/mo |
| United States | Toll-free 800/833/844/855 | $1.50/mo + usage |
| United Kingdom | London 020 / 0330 national | $0.63/mo |
| Germany | Berlin 030 / nationwide | $1.10/mo |
| Israel | National 073 / city codes | $2.50/mo |
| Japan | Tokyo 03 / nationwide | $2.00/mo |
| Australia | Sydney 02 / nationwide | $1.30/mo |
Full per-country pricing on each country page. Per-minute outbound from $0.003/min for US-domestic landline; Origin Based Rating (OBR) applies to EEA outbound.
FAQ
Can Yealink phones register directly to DIDHub without a PBX?
Yes — for simple deployments (1-50 users), Yealink phones can register to DIDHub directly. For shared lines, hunt groups, IVR, and other PBX features, put a PBX (FreePBX / 3CX / Grandstream UCM) in front.
Does DIDHub work with Yealink Meeting / Yealink Cloud?
Yealink Meeting is video-conferencing (not telephony); DIDHub doesn't apply. Yealink Cloud (YMCS) is device management; the SIP credentials in the Yealink Cloud-pushed config can target DIDHub.
What's the recommended Yealink-to-DIDHub transport?
TLS (port 5061) for SIP signaling and SRTP for media. Avoid plain UDP / RTP for production.
Yealink Teams-certified phones — do those work with DIDHub Direct Routing?
Yes. Yealink Teams-mode phones register to Microsoft Teams; Teams Direct Routing routes their PSTN calls through DIDHub's managed Teams SBC. See /teams-direct-routing.
Buy your first Yealink Cloud DID
Sign up at /signup, pick a country, route the DID to your Yealink Cloud SIP trunk. Sub-60-second activation on most countries. No commits.
Ready to get a number?
Pick a DID in 130+ countries from $1.99/month. Activates instantly on most numbers.